Description
Click Bond CB904 Disposable Abrasive Pad – Pack of 10 for Adhesive Bonding Surface Preparation
Click Bond CB904 Disposable Abrasive Pad is a specialized surface preparation abrasive pad designed specifically for use with Click Bond’s aerospace adhesive bonding system — providing consistent, controlled surface preparation of the bonding area before installation of Click Bond studs, cable tie mounts, conduit clamps, and other adhesive bonding hardware used for securing wire bundles, tubing, and components to aircraft structure. The CB904 disposable pad provides the defined surface preparation required by Click Bond’s installation procedures to achieve the specified adhesive bond strength for aerospace-qualified structural attachment.
Click Bond’s adhesive attachment system is widely used throughout commercial and military aerospace for securing non-structural accessories to aircraft surfaces without drilling — the adhesive bond strength of the attachment depends critically on proper surface preparation of the bonding area. The CB904 disposable abrasive pad provides the standardized abrasion of the bonding surface that Click Bond’s adhesive system requires, removing the oxide layer, contamination, and surface glaze from the bonding area to expose a clean, mechanically prepared surface for optimal adhesive wetting and bond formation.
The pack of 10 provides the supply for multiple Click Bond installations in a single work session or maintenance event. The disposable design ensures that each bonding surface is prepared with a fresh abrasive pad that has not been contaminated by previous use — contamination from previously abrade surfaces can be transferred to new bonding areas by reused pads, potentially compromising bond strength.
| Attribute | Detail |
|---|---|
| MPN | CB904 |
| Brand | Click Bond |
| Product | CB904 Disposable Abrasive Pad |
| Color/Grade | Abrasive Gray |
| Type | Disposable Surface Preparation Abrasive Pad |
| Pack | 10 Pads per Pack |
| System | Click Bond Adhesive Bonding System |
| Application | Bonding Surface Preparation for Click Bond Hardware |
| Use | Single Use — Disposable After Each Bond Installation |
| Industry | Aerospace, Commercial Aviation, Military Aircraft |
Technical Information
Click Bond CB904 abrasive pads are sized and graded to provide the surface preparation specified in Click Bond’s installation procedures — the abrasive grade produces the surface profile and cleanliness level required for the Click Bond adhesive to achieve the rated bond strength on the prepared substrate. The pad size is matched to the bonding footprint of Click Bond hardware, enabling the technician to prepare the correct area of the aircraft surface for each installation without over-abrasion of surrounding finish.
Proper Click Bond installation procedure requires the bonding surface to be abraded with the CB904 pad, cleaned with solvent, and the adhesive applied within the allowed working time before the bond degrades. The abrasion step removes the aluminum oxide layer on aluminum structures and the release agents and contamination on composite surfaces that would prevent the adhesive from achieving intimate contact with the substrate material. Skip or shortcut the abrasion step and the resulting bond strength will be below the specification required for aerospace-qualified attachment.
Use one CB904 pad per bonding location — do not reuse pads between installations. After abrading, clean the prepared area with the specified solvent wipe per the Click Bond installation procedure before applying the adhesive. Contamination of the prepared surface between abrasion and adhesive application will reduce bond strength — maintain a clean working environment and complete the installation promptly after surface preparation.
Why Choose?
- ✅ Click Bond System Compatible — Specified for Click Bond installation procedures
- ✅ Disposable Design — Fresh pad for each installation, no cross-contamination
- ✅ Consistent Surface Preparation — Standardized abrasion for repeatable bond strength
- ✅ Pack of 10 — Supply for multiple installations per work session
- ✅ Aerospace Qualified System — Click Bond is an approved aerospace attachment method
Applications
CB904 is used for surface preparation of bonding locations during installation of Click Bond studs, cable tie bases, conduit clamps, and other Click Bond adhesive hardware on aircraft fuselage, frames, and structure in aerospace manufacturing and MRO repair operations.
Frequently Asked Questions
Q: What is Click Bond CB904?
A: CB904 is a disposable abrasive pad for preparing bonding surfaces in Click Bond adhesive attachment installations — abrading the bonding area to ensure the adhesive achieves the specified bond strength for aerospace-qualified attachment.
Q: MPN for Click Bond CB904?
A: MPN is CB904.
Q: Why must the pad be disposable?
A: Reusing pads can transfer contamination from previous bonding areas to new bonding surfaces, potentially reducing adhesive bond strength below specification. Disposable pads ensure each installation starts with a clean, uncontaminated abrasive.
Q: Can CB904 be used for other adhesive systems?
A: CB904 is specifically designed for Click Bond’s installation procedure. Verify compatibility with other adhesive systems before use, as different adhesive systems may require different surface preparation specifications.
Q: How many pads are in a pack?
A: Each pack contains 10 CB904 Disposable Abrasive Pads.
Reviews
There are no reviews yet.